Ứng dụng mới cập nhật Symbian OS 9 (Phần II)

Anti Touch v2.0 {ALARM AND DISALARM BY MOVEMENT And PASSWORD}Update 10/11/08

Anti Touch by Marcelo Tinoco

CHANGES OF VERSION 2.0:
1- Option of choice to enable and disable the alarm by two methods: Password and Movement. Currently, it is the only app in the world that has 2 options for arming and disarming the alarm. If enabled by password, just after entering the correct password the app will end after armed. If activated by movement will require coordinated 2 movements for the phone recognize these 2 movements to exit the app.
2- Once you entered the password, it will be stored in a hidden folder system and without access, which from next time you open the app is no need to reenter your password, which you enter the password only when you open the app if you want change the password before.
3- Option “Exit without star” for cases where you have chosen the field of “Options for alarm ” one of the 2 options (Password or Movement) and want to close the app pieces without it, because if you wanted to quit the app after choosing one of these 2 options mentioned above would have to click in “Start” so to exit, where with this option of “Exit without start” there is no such need.
4- Unable to change any option after a preferred option was chosen, that is, since the “Options for alarm” was chosen among “Password” or “Movement”, Another option may not be chosen not to conflict with app and disable your security, where you will see the message “Access Denied !!” if you try to change the option.
5- Unable to change any option after the app was started, had cases where drive by password on that after the alarm was triggered, the person hinders again in the “Options for alarm” and then “Password” and was to change the password for a new number and just type this number again in the “Exit” to disarm the app. Now, this no longer is possible, because after the app was started, any change is prohibited, which appears to message “Access Denied !!” if you try to change anything.
6- Once the app is started, the screen becomes FULL, preventing from appearing in a visible the options “Menu” and “Exit” for those who tamper with the appliance and trigger the alarm, where the person is not ‘ll see these options that appear in the bottom right and left before the app be started. The options are still there and active, but are hidden by screen-mode FULL. For you disarm the app in the “Password”, just click the blue key that is toward the corner bottom right is where it is hidden the “Exit” and enter the correct password.
7- There is no need to install on any folder on the phone the sound file called “Alarm.mp3″ and the file “Picture.jpg” already be installed directly by the app, thereby avoiding some mistakes in installation that some people were commenting on the not install these files in the folders that I stated before. The option to customize continues this, and the place where these 2 files is no longer the same, and informed below if you want to customize the app with other sounds or other image.
8- Introduction of Self-Installation in Memory of Mobile in the act of installing the device, or words, even if you, mistakenly, want to click in the “Memory Card” when in the facility already inside the unit, it will not offer you more this option, since installing direct phone’s memory.

Anti Touch app was created from the need for a full app to trigger an alarm to move around in our smartphones without our permission and was asked by several people in our communities and our Orkut forum, where from other Similar previously created apps and still incomplete, we created this, functional and complete. It triggers an audible alarm activated when someone moves the unit, identified by the movement of Accelerometer of the smartphone, only stopping for alarm if the person enter a password that you pre-determines opening the app.

Usage instructions:

By opening the app, go to “Options” and “Settings” and enter a whole number in the option “Sensitivity”, where we insert the number “9″, and that is not mandatory, where you enter the number you want between “0″ and “9″;

Then, still within “Settings”, introduce a password in “Password”;

Now click in “Start” and place your smartphone in position and
location that you want it to be resting and with the app in activity.

If someone move the smartphone, the alarm will be operated and
will only be finalized if you or the person who operated, click in “Options” and “Exit” and enter the password that you created when you open the app. Even if you or the person click on the red button END, the app will work, where you should enter the area where show the apps downloads (using Taskman or the system of the proper equipment) and activate it again, and then enter the password on “Options” and “Exit” to quit the app itself.

To you exit the app without to select “Start” and started the Alarm, just click “Exit” and type any number in the “Password” that the app will end.

Differences and advantages over other similar apps:

1) You can customize it now in a much more simple, where not even put the picture and sound
the alarm within the app if you want to customize already in the facility,you can already do
it in very simple. If you do not want, I'm sending a picture that is the same as the icon of
the app and sound the alarm for you install a particular folder that will be explained in
this file "Read Me" which follows along with the app.

2) In my app, if someone moves the cell and activate the alarm ,if try to turn off the app
or exit the app pressing the red button (END) to finalize it will not do, continuing with the
sound of alarm.

3) To exit the app, the person has to know the password that you made when you open the app,
otherwise the alarm will be ringing continuously.

4) All commands in English.

5) The app now follows with its own icon, not the symbol of Python, as in other similar apps.


CODE
http://in.youtube.com/watch?v=pLyAT0OBC54&eurl












​

gStorage v1.1.90 S60v3 Free version

gStorage for S60 3rd Edition or later(Free)

Abstract: Easily manage local files in your mobile phone and network files in a remote storage space. Easily access any attachments in your Gmail box(Gmail storage space is supported at this release). The touch-screen devices, such as 5800 XpressMusic, are supported also.

This software is a file management tool, which can be used to manager your local files in a mobile phone and network files in a remote storage space. Currently, it supports those files(attachments) in your Gmail box. As we all know, the storage capacity of one free Gmail box is considerably large, up to 7Gb for the moment, and can be upgraded to 400Gb. So, with this tool, you will get a large enough disk for your phone right now. It easily converts your Gmail box to a local mapped drive and you can exchange data with your Gmail box. Another way to extend the capacity for your phone is applying for another free Gmail box, but this requires you maintaining additional accounts.

Note: At a default installation, this software is a freeware with a little limitation -- the total size of files to be sent or downloaded should be not more than 500Kb.



Attached image(s)











​

TringMe MobileVoip application avilable now-Goodbye Roaming!!(beta v.1.10)



We are extremely excited to announce the public availability of our Mobile VoIP client (Beta). Although the MobileVoIP application was available in a private beta since a few months, based on the user feedback, we have made additional optimizations to ensure that one can get the best voice quality in such an environment.
The application is currently supported on several Nokia devices which include E51, E60, E61, E61i, E65, E70, E90, N80, N81 (all versions), N82 and N95 (all versions). We will continue to add more phones and platforms to the supported list.
The application utilizes the underlying data network to initiate Mobile VoIP calls. While there are a couple of MobileVoIP applications already, what differentiates TringMe MobileVoIP is that calls can be made to and received from the all termination options that TringMe supports which include landline and mobile phones, SIP phones, Instant Messengers (Gtalk), Flash Widgets etc. This gives the user an extended range of flexibility to determine the best options for making and receiving a call from a mobile device.
For example, a TringMe MobileVoIP user can call another user on either MobileVoIP or Gtalk or even on our Flash widgets. Also, a TringMe user can configure his or her personal push-n-talk widget to connect to TringMe's MobileVoIP client. Anyone clicking on it will directly ring the Mobile Client. Similarly, a Gtalk user can call TringMe's MobileVoIP user by typing 'call <tringme username>' into Gtalk chat window.All this is in addition to making worldwide phone calls like other MobileVoIP solutions. And this is very unique about TringMe.
Another unique feature of TringMe is that it is easy to integrate TringMe's MobileVoIP solution using our published API. TringMe's MobileVoIP solution can be used by other VoIP providers by simply entering appropriate SIP settings in the user profile or using our API.
To use TringMe MobileVoIP, just download this athacmant belowe. Once the application is installed, just login with TringMe credentials and you are ready to use MobileVoIP. No complicated settings or need to send any SMS to activate or initiate calls.
Once installed, you can start making calls through TringMe like your regular calls. Just dial, and choose the internet call option on your mobile and you are done.

Based on the beta users feedback, we decided to support MobileVoIP over both WiFi and 3G/2.5G networks. However, please note that due to the inherent nature of 3G/GPRS networks, the quality of service (QoS) over 3G may not be the most ideal for a clear voice call. However, working within the limits of the underlying network, our solution tries to extract the best QoS that it can.
We are also working on supporting other embedded platforms and will notify you as soon as we are ready to release.









​

Cái này mình đăng kí xong, ok, nhưng khi mở ứng dụng lên thì nó bắt kết nối internet để xác nhận bản quyền, mình mà yes thì nó báo key ko hợp lệ, ko đồng ý thì lần sau nó bắt đăng kí lại, làm cách nào bi giờ? mỗi lần mở ứng dụng lại phải điền key cũng bất tiện...
(đừng bảo mình hack phone nhé)

có bản 0.45 rồi bạn ơi. mình mới vừa update xong.

CamCuts v1.00 by Snake

I always liked the shortcuts to the cam functions like night mode, flash, etc on my old k750i.
Then i got my N82 black, took some pics, but f***k where are my beloved shortcuts!? **** menu ***, i hate it.

I was looking around if theres any programm / hack out there to bring camera shortcuts to my N82. Unfortunately there was no such thing, until now!!!

So i had to do it by myself, and what i created is this:



You have access to most camera functions by just pressing one key!!
No more menu ***!!

And the best thing is, its free!


There is an english and a german version with instructions in the package!
Python has to be installed on phone!

Have fun!

testet on N82 black

credit to nuttenlova










​

Breeze FriendFeed

View and update your FriendFeed Account from your mobile phone









​

QuickOffice Premier Upgrade v6.0.166 S60v3 SymbianOS9.1 Unsigned Cr@cked





Quickoffice 6.0 enables remote file access and bolsters enterprise document security on S60 smartphones
It enables users to remotely access, browse and open files stored in Internet cloud services, such as Apple's MobileMe iDisk, FilesAnywhere and Box.net, etc. The software also allows access to files on corporate drives and servers, including Microsoft™ SharePoint™.


In addition, the 6.0 release includes new security features for using encrypted and password-protected Word and Excel documents. With these additions, Quickoffice continues to drive mobile professional productivity to new levels. Users now have unprecedented document access, reducing the need to store files on the phone while increasing security to protect documents stored locally.





Quickoffice 6.0 also **** several other new features, including a file manager that handles all file types and support for opening, editing and saving back to Zip files. In addition, Quickoffice enables users to view charts in Office 2007 Excel spreadsheets including real-time recalculation. The software suite is optimized for viewing and editing, and includes superior document 'round-trip' capabilities to retain file formatting and maintain data integrity. Quickoffice has also updated its Adobe Mobile Reader for S60 with the latest Adobe engine, providing faster response and better handling of complex PDF documents.

For hacked phones only for now.

Download :

Code:

CODE
http://rapidshare.com/files/1625573....S60v3.SymbianOS9.1.Unsigned.Crd-illusion.rar


​

Smart Rename v0.60

Version:0.6.0
Author:wangyufeng
Date:2008-11-08

This software can read information of sis file and rename by software’s name +version.You can understand what is the file.Software can distinguish the theme and rename it to ’theme-’+software’s name!



Attached image(s)






​

Messmo v1.2.13 (Update)



Send SMS, Free TXT and attachments to your friends' mobile numbers.
Messmo is an application that uses the mobile Internet, and combines SMS with the best of instant messaging and email, to give you:

Free TXT

Use real mobile numbers for SMS, Free TXT and attachments. Send to Messmo and non Messmo users.

FriendCasts

Create an instant group with a new number. Send one TXT and all of your friends get the message. Want to share a cool photo? Start a chat on a hot topic? FriendCasting is for you.

Your World

Messmo is about reaching your world. Right now upload, post and much more with FaceBook using 1900FBOOK. Or with 1900EMAIL choose to receive TXT alerts from any site when the site sends you an email.

Requirements:
· MIDP 2.0, CLDC 1.1​

​

​