các pác lấy dùng thử nhé Nokia 8587, lg 7020, Motorola V720, SKY 5000 - 6200, Samsung V300: --------------------------- |24 ...................... 1| --------------------------- 12, 19 - Gnd 21, 22 - +Vcc 13 - Tx 14 - Rx ******************************************************** Kyocera 2235/2255 Phone Signal 1 Ground 12 DP1_TXD 13 DP1_RXD 14 DP1_CTS/ 2 DP1_DTR/ 9 DP1_RI/ 3 DP1_RTS/ 15 DP1_DCD/ 4 Ground 6 DP2_RTS/ (SYNC) 11 DP2_TXD (DIN) 5 DP2_RXD (DOUT) 7 DP2_CTS/ (CLK) 10 VBATT 8 VextDC Kyocera Cable Connector (plug, facing the pins), (no coaxial pin) 16---9 [ O :::::::: ] 8----1 ******************************************************** Audiovox 9100 pinout: Count direction - from ANT whole in connector : O 1 3 5 7 2 4 6 ... 1,3,21,25,26 - tied together to GND 13 - rx (to phone) 14 - tx (from phone) ******************************************************** CyberBell pinout: Cable shematic: 14,15 - GRN 12 - rx 13 - tx keyboard 18 16 14 12 10 8 6 4 2 17 15 13 11 9 7 5 3 1 ******************************************************** Samsung SCH-611, 900, 811, 470, 670, 750, SPH-A400... pinout: 15,16 - +Battery 8 - TX data 7 - RX data 2,4,6 - GND SCH-200 Serial OUT - PIN 4 Serial IN - PIN 3 DC GND - PIN 1 Samsung n191 keypad --------------------- |18 ................ 1| --------------------- 5 - RX 6 - TX 8 - GND 14 - Vcc Samsung SCH, SCH-X 3 - + 11 - TX 12 - RX 13 - GND Samsung SCH-A530, SPH-A620 ---------------------- |1 ................. 18| ---------------------- 5, 18 - + 13 - RX 14 - TX 8, 11 - GND Samsung SCH-A2000, SCH-A7500, SCH-A7600 keypad --------------------------- |1 ...................... 24| --------------------------- 8 - GND 16 - TX 17 - RX Samsung SPH-N240, N400, A460, A500 etc.. | || || || || || 0 1 11 1 - GND 2 - TX 3 - RX 4 - Vcc ******************************************************** Hundai600 pinout: 5 - tx 6 - rx 18,19 -Gnd 22- 5v+ HYUNDAI 600 (AUDIOVOX CDM-100) keypad --------------------------- |1 ...................... 24| --------------------------- GND - 5, 6 VCC - TX - 19 RX - 20 ******************************************************** LG-300 pinout: 10,17,18 - +Battery 9 - Serial Out 12 - Serial In 14 - DC GND LG keypad --------------------- |1 ................ 18| --------------------- 1+18 - + 9 - TX 12 - RX 15 - GND LG _________________ |1 ........................ 24| |________________| 3 - dtr 13 - tx 14 - rx 17 - cd 18 - ri 12, 19 - gnd 20 - cts 21, 22 - + 23 - rts 24 - dtr ******************************************************** Motorola (CDMA) Pinouts: 1) GND Connected with 22pf to pin 3 2) RF out 3) GND Connected with 33 pf to pin 8, 33 pf to pin, 33 pf to pin 7 4) BAT_FDBAK 5) MAN_TEST connected with 10k to L275 (not used on digital phones) 6) RS232_TX - connected to MCU SPI bus 7) RS232_RX - connected to MCU SPI bus 8) AUDIO_IN 9) AUDIO_OUT 10) GNDA (Ground reference) Connected with 33 pf to pin 13, 33 pf to pin 14 11) UPLINK -| 12) DOWNLINK -|- DSC bus connected to the BIC 13) DSC_EN_B -| 14) EXT_B+ 15) Gnd Motorola 182c (Patagonia) 11gnd 13,14 rx,tx. ******************************************************** NOKIA 8887 keypad --------------------- |18 ................ 1| --------------------- 1, 18 - GNDÿ 8 - Tx 9 - Rx 10, 11 - +Vcc NOKIA 8587 keypad --------------------------- |24 ...................... 1| --------------------------- 12, 19 - Gnd 21, 22 - +Vcc 13 - Tx 14 - Rx ******************************************************** Quallcom pinout QCP-820 3-gnd 8-Tx 9-Rx ******************************************************** Sanyo SCP-8100 pinout (not tested!): GND - 1,9,12 RX - 6 TX - 8 +5v - 10 Sanyo 4900/5300/8100 COM: 1,12(!!!)-GND 10-Vpp 6-TX(from phone) 8-RX(to phone) USB : 1 - black (GND) 14 - red (Vbus) 15 - Green (Data+) 17 - White (Data-) 18 - black (GND) ******************************************************** SKY IM-1xxx - IM-3xxx, Kyocera 5135 --------------------- |18 ................ 1| --------------------- 1, 2 - GND 4 - RX 6 - TX 18 - +
