[Kernel] [N7000] [TW-AOKP-AOSP-CM9-CM10-PA-MIUI ] ~HydraCore v4.3b~ -1 Kernel cho mọi ROM

Thảo luận trong 'SAMSUNG' bắt đầu bởi Khỉ Con, 11 Tháng chín 2012.

  1. Khỉ Con interista

    [​IMG]

    [​IMG]

    [​IMG]


    Introducing HydraCore - the first kernel for all ROM types for the Galaxy Note GT-N7000 !​



    Q&A THREAD (click here)
    Please refer to this thread only for non-development chat. Failing to do so will result in your post being removed by the moderator constantly monitoring this thread

    General Features:
    - Built from latest samsung sources
    - Multiboot InitramFS for all rom types
    - Patches for full functionality for all rom types
    - Supports Touchwiz ICS, AOKP, AOSP, CM9 , CM10, JellyBean, ParanoidAndroid, MIUI roms
    - OC/UV version and a Standard frequencies/voltages version
    - Full root
    - Brand new CWM
    - Magical elves and wizardry**



    Kernel Features
    - Noop scheduler default
    - Tweaked OnDemand governor default
    - SLQB memory allocator
    - Lots of IO tweaks
    - Lots of kernel scheduler tweaks
    - Crap load of CPU governors
    - Adjusted all cpu voltage tables (OC kernel only)
    - Realtime cpu temperature, board temperature readouts and VoltGroup information in settings>about>kernel version
    - Optimised VM memory setting
    - Optimised Global block readahead
    - Increased memory for surface flinger and gpu
    - CIFS support with UTF8
    - Hardcore's MDNIE patch from speedmod k3-9
    - Voltages and frequencies now in userspace for Voltage Coltrol app / AOKP direct support
    - lots, and lots of other tweaks (see full source)



    CWM Features
    - External SD cards mount properly within cwm for USB Mass Storage mode / PC connection
    - Select between .dep and .tar backups. TAR backups recommended!
    - Fully working




    THIS KERNEL HAS MMC_CAP_ERASE REMOVED AND IS FULLY SAFE FOR ALL WIPES ON ALL ROM TYPES




    Kernel Installation
    Install either through CWM or PC/Mobile ODIN in the usual manner. Wiping Cache and Dalvik Cache is unnecessary and wont make any difference. Flash only with 25% or more charge on the phone



    Installation routine for the rom of your choice
    - Either flash HydraCore or have a kernel installed with CWM
    - Download your ROM of choice, follow any specific rom installation instructions (in the ROM thread OP) and flash with CWM
    - Flash HydraCore in CWM or with Mobile / PC Odin



    Kernel Versions
    There are two versions of this kernel, one with native OC/UV and one with standard (stock) frequencies. If you are new to this kernel, flash the STD (standard) version first, as this will work with all phones.

    As you become more experienced, you might want to try the OC/UV kernel, which sets the maximum CPU speed to 1600Mhz and Maximum GPU speed to 400mhz. The OC/UV kernel is undervolted, and in some circumstances can offer significant performance improvements. However, it *may* use more battery and you phone will get a little warmer.


    CPU Frequencys and how they are used
    Not all apps/games force the CPU to ramp up to the highest frequency (1.4 or 1.6 GHz, depending on the kernel variant you flashed). For example, while playing Temple Run, Coin Dozer and Mutant Roadkill, the CPU will mostly stay at 600 / 800 MHz. Even while playing intensive games like Pocket Legends, the CPU will stay at 600 / 800 MHz most of the time, with the CPU ramping all the way up to the maximum frequency only when very intensive graphics occur, which is like 20% of the time.


    Downloads:

    STANDARD Kernel (no OC)

    v4.3b CWM Zip - http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v4-3b_STD.zip
    v4.3b ODIN Tar - http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v4-3b_STD.tar

    OC/UV kernel (with overclock / undervolt)

    v4.3b CWM Zip - http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v4-3b_OC.zip
    v4.3b ODIN Tar - http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v4-3b_OC.tar



    Known Issues
    - Button Backlights in TouchWiz ROMS
    Setting the "Touch key light duration" to "Always Off / Always On" will not behave as such. The touch keys will light up and stay like that for up to three seconds if touched directly. Touching / unlocking the screen will not cause them to light up. On non-TouchWiz ROMs, this behavior has not been detected.



    REPORTING BUGS
    When reporting a bug, please provide the following information

    - The ROM you are using
    - The kernel version (oc / std)
    - Your phones voltage group (settings > about > kernel information)

    Failing to provide this information will result in your post most likely being ignored - remember we cannot help you if you cannot provide us with information we need



    Other information, history and for German speakers
    You can find the complete history of this kernel, with all older changelogs and news, all translated into German by our friend Atonal at this link. You will also find a complete download set of all versions of my kernels at the same place! brilliant :)

    http://www.pocketpc.ch/showthread.php?p=1454836




    Changelog

    v4.3b HydraCore
    - Fixed ROOT

    v4.3 HydraCore
    - USB driver changes (again!)
    - Some performance improvements in initramFS
    - JellyBean initialisation file changes

    v4.2 HydraCore
    - Fixed TW camera
    - VFS Cache Pressure increased to 30

    v4.1 HydraCore
    - Fixed 1080p video playback for non TW roms
    - Some minor memory tweak changes (vfs cache pressure 100 > 15)
    - SWAP support

    v4.0 HydraCore
    - Reverted to kernel 3.0.15 for patch compatability and some fixes
    - Completely fixed all bootanimation problems with non TW roms (uses roms own bootanimation binary now) - will fix never ending bootanimations, bootloops and long delays
    - Fixed bootsound on TW roms
    - Changes to initramfs, cleanup
    - VM settings changed
    - Some USB driver changes for better compatability
    - Reverted to MDNIE from speedmod k3-9
    - stuff i have forgotten

    v3.5 HydraCore
    - Rebuilt from scratch
    - Addressed lag problems
    - Voltage Control apps / AOKP built in "performance" tab now fully working
    - Android logger built in (not a module any more)
    - Fixed Button lights in non TW roms
    - Removed all undervolting from STD kernel - now completely stock frequencies and voltages
    - OC kernel min GPU now set to 267mhz @ 925mv (barely more than old kernels @ 160mhz)
    - Re added all standard kernel debugging for full application support (logging is not used by the kernel but is available for apps, particurlarly debugfs)
    - Updates to hardcore's k3-11 MDNIE settings
    - SLQB allocator


    v3.1b HydraCore
    - Fixed bluetooth for TW roms

    v3.1 HydraCore
    - Updated to SuperSU and binary from chainfire for rooting / superuser
    - Cleaned up the initramfs
    - Changed bootanimation binaries (now working properly on JB)
    - Compile tweaks
    - Some minor fixes

    v3 HydraCore
    - Fixed the data corruption issue
    - Reimplemented fget_light() ( fsync() )
    - Fixed MTP for CM10 nightlies, and probably for everything else (with both SD cards mounted properly)
    - Fixed weird bootanimation behavior
    - Switched to preferred toolchain - codesourcery 2012.03
    - Personally tested on TW, AOKP, CM10 preview and TW
    - 1 extra magical elf per kernel

    v2b HydraCore
    - Fixed autorotation

    v2 HydraCore
    - Patchups to kernel 3.0.36
    - Full USB driver patches
    - Reverted to SLUB heap allocator
    - Reinstated semi-touch CWM
    - Better bootanimation support
    - Added J4FS driver for better AOSP / CM compatability

    v1 HydraCore
    - First general release



    Kernel Kitchen, Full Source code and GPL:
    Basically i can't be bothered with GitHub so I make my entire build directory, build scripts and initramfs available in one complete package. This is compliant with the GPL licence.

    You can unpack the package to any folder anywhere on your system. You will need a cross compiler toolchain installed, and set the Makefile in source/Makefile point to the cross compiler location. Codesourcery's arm-none-linux-gnueabi 2012/03 release is recommended.

    Read the README-INSTRUCTIONS file, and from a root terminal, run the menu.sh script. The rest is obvious :good:

    The source packages contain the following

    - Kernel kitchen
    - Unmodified reference source
    - Modified files directory
    - Working source directory
    - a .patch which you can use to patch any other sources with (includes ALL changes)
    - Initramfs

    Kernel kitchen source package FTP directory and downloads -
    http://hecubus.com/filelist.php?dir=xda/ksource



    USER BANNER FOR NOTECORE KERNEL

    [​IMG]

    add the following code to your signature!
    Mã:
    http://hecubus.com/xda/sig.png




    Credits and thanks:
    Samsung
    Hardcore
    Funky81
    Francisco
    Chainfire (for his patched CWM recovery)
    entropy
    HomuHomu
    gokhanmoral of siyahkernel for the multiboot initramfs system and some kernel patches, including the USB driver changes
    Antiochasylum
    betoNL
    All my friends, followers and supporters

    A massive thankyou to Kelinger for providing a proper FTP file host! you da man!
    A massive thankyou to Nazar78 for his special custom bootanimation support code!
    A HUGE thankyou to PHJZ for making the voltage table detection patch :good:


    DONATIONS

    Donations are gratefully accepted but never requested!

    you can make donations to me HERE


    BETA TEAM ONLY
    Current version - none released



    DISCLAIMER
    By flashing any custom kernel you understand the risks involved. As with any flash, there is always a small risk that something could go wrong and/or data loss. I am in no way responsible for any damages, loss of data, brickage, loss of work or any other loss associated with any faults due to the installation of this software.


    **magical elves were harmed in the making of this kernel**
  2. hbs2tkr

    hbs2tkr Thành viên

    Bài viết:
    96
    Được Like:
    24
    Bê nguyên cả topic bên xda thì chả có gì hay ho
  3. Khỉ Con

    Khỉ Con interista Staff Member

    Bài viết:
    10,532
    Được Like:
    11,479
    haiz, chú thông cảm, a phải làm nhiều việc quá nên lười mà :D
    hbs2tkr thích bài này.
  4. hbs2tkr

    hbs2tkr Thành viên

    Bài viết:
    96
    Được Like:
    24
    share em làm cho với nào :D
  5. Khỉ Con

    Khỉ Con interista Staff Member

    Bài viết:
    10,532
    Được Like:
    11,479
    Chú thích thì cứ làm, lập bao nhiêu thread cũng được, thoải mái đi !
    hbs2tkr thích bài này.
  6. hbs2tkr

    hbs2tkr Thành viên

    Bài viết:
    96
    Được Like:
    24
    bê nguyên topic bên tinh tế sang đây nha anh :D
  7. Khỉ Con

    Khỉ Con interista Staff Member

    Bài viết:
    10,532
    Được Like:
    11,479
    ok, chú xử lý topic con Note thế nào cũng được mà. À nhưng nhớ xóa hoặc thay link tinh tế nhé
  8. hbs2tkr

    hbs2tkr Thành viên

    Bài viết:
    96
    Được Like:
    24
    là sao anh. link toàn của xda cả mà :D
  9. Khỉ Con

    Khỉ Con interista Staff Member

    Bài viết:
    10,532
    Được Like:
    11,479
    Uh, ví dụ ảnh ọt hoặc gì đó ấy mà. Vì mọi người thường up ảnh lên host của tinh tế ^^
    hbs2tkr thích bài này.
  10. hbs2tkr

    hbs2tkr Thành viên

    Bài viết:
    96
    Được Like:
    24
    thế phải sửa ko ít. để mai mốt rảnh em làm đã
    Khỉ Con thích bài này.