Camdriver k810

654321 · 25 Tháng năm 2008

Các Pác ui

Camdriver con k810 này thế nào nhỉ???
Pác nào biế thì xin chỉ giáo cho biết với.......

info_name=MCB881;
info_vendor=N1;
info_major_ver=1D;
info_minor_ver=63;

cam_power_on_0 = 5, 1, 07, 1, 0; // Set GPIO 07 as output. BERGF
cam_power_on_1 = 5, 2, 07, 0, 0; // Hold XE_STROBE low BERGF
cam_power_on_2 = 5, 0, 0, 1, 5; // Pull RST pin
cam_power_on_3 = 5, 1, 26, 1, 0; // Set GPIO 26 as output
cam_power_on_4 = 5, 2, 26, 1, 5; // Enable main camera to bus
cam_power_on_5 = 5, 1, 24, 1, 0; // Set GPIO 24 as output
cam_power_on_6 = 5, 2, 24, 1, 5; // 1.2 V
cam_power_on_7 = 5, 1, 35, 1, 0; // Set GPIO 35 as output
cam_power_on_8 = 5, 2, 35, 1, 10; // 1.8V IO 2.7V AF
cam_power_on_9 = 5, 3, 1, 32C8, 5; // Turn on 13 MHz clock and wait 5 ms
cam_power_on_a = 5, 0, 0, 0, 12C; // Release RST pin and wait 300 ms
cam_power_on_b = 5, 1, 37, 1, 0; // Set GPIO 37 (AF-LED) as output
cam_power_on_c = 5, 1, 07, 0, 0; // Set GPIO 07 as input BERGF
cam_power_off_0 = 5, 0, 0, 1, 5; // Pull RST pin
cam_power_off_1 = 5, 3, 1, 1, 5; // Turn off 13 MHz clock
cam_power_off_2 = 5, 1, 35, 1, 0; // Set GPIO 35 as output
cam_power_off_3 = 5, 2, 35, 0, 10; // 1.8V IO 2.7V AF Off
cam_power_off_4 = 5, 1, 24, 1, 0; // Set GPIO 24 as output
cam_power_off_5 = 5, 2, 24, 0, 5; // 1,2V OFF
cam_power_off_6 = 5, 1, 26, 1, 0; // Set GPIO 26 as output
cam_power_off_7 = 5, 2, 26, 1, 0; // Disable main camera to bus
cam_power_off_8 = 5, 1, 37, 1, 0; // Set GPIO 37 (AF-LED) as output
cam_power_off_9 = 5, 2, 37, 0, 5; // Set GPIO 37 (AF-LED) low

// DATA
//================================================
cam_i2c_address=1F;
cam_i2c_clock_freq=64; // Clock 100khz
cam_vf_clock_freq=1,32C8; // Clock #1 on, frequency 13MHz
cam_ss_clock_freq=1,32C8; // Clock #1 on, frequency 13MHz
cam_vf_format=B100;
cam_ss_format=0001; // JPEG default
cam_ss_format_6=B100; // YCbCr
cam_ss_format_7=B100; // YCbCr
cam_ss_format_8=B100; // YCbCr
cam_ss_format_9=B100; // YCbCr
cam_data_offset=2; // JPEG default
cam_data_offset_6=0; // YCbCr
cam_data_offset_7=0; // YCbCr
cam_data_offset_8=0; // YCbCr
cam_data_offset_9=0; // YCbCr
cam_vf_sync=5;
cam_ss_sync=5;
cam_ss_jpeg_buffer_size_1=E1000;
cam_ss_jpeg_buffer_size_2=F4240;
cam_ss_jpeg_buffer_size_3=124f80;
cam_ss_jpeg_buffer_size_4=177000;
cam_ss_jpeg_buffer_size_5=177000;

// SUPPORTED SIZES
//================================================

sup_sizes = 1[280,1E0,0],2[500,3C0,0],3[660,4C8,0],4[7D0,5DC,0],5[800,600,0],6[140,F0,0],
7[280,1E0,0],8[500,3C0,0],9[660,4C8,0],11[140,F0,BB8],12[140,F0,4B0],
19[60,80,5DC,140,F0],20[90,B0,5DC,140,F0],21[80,60,3E8],22[80,60,2EE],23[B0,90,3E8],24[B0,90,2EE];

// MACROS
//================================================

SET_REG = 05 02 00 !0 !1 $f $r2 01 $d0005; // Sets register to value SET_REG(REG,VAL)

READ_REG = 05 01 00 !0 01 $f !1 ; // Reads register READ_REG(REG,$r2 01)

CLEAR_EVENT_FIFO = $s0 01 [ 0 20 05 01 00 03 03 $f $r4 0 012 $d0005 $"CLEARED_EVENT_%0_%1_%2" $c0 00 $cl #SET_REG(06,03) $cx];

CLEAR_EVENT = 05 01 00 03 03 $f $r4 0 023 $"CAPTURED_%0_%2_%3" #SET_REG(06,03); // Note FIFO is not cleared Clears event register and start listen to TRIG

WAIT_FOR_TRIG = $h0 25 5 1000 $c0 00 $"TIMEOUT" $cx; // Listen to TRIG

COMMAND = 06 02 00 01 !1 !0 $f $r3 012 $d0005; // Only send command, no reply is read out

CAPTURE_EVENT = #WAIT_FOR_TRIG #CLEAR_EVENT; // Waits for signal on TRIG, and clear the event register when it has arrived

COM_EVENT = #CLEAR_EVENT_FIFO #CLEAR_EVENT #COMMAND(!0,!1) #WAIT_FOR_TRIG #CLEAR_EVENT; // Waits for signal on TRIG, and clear the event register when it has arrived

WAIT_FOR_MODE = $s0 01 [ 0 ff 05 01 00 03 03 $f $r4 1123 $c3 ea $s0 00 $cl $d0005 $cx ]; // Use poll instead of TRIG. It is difficult to use TRIG if reply and mode transfer comes to close

CHANGE_MODE = #CLEAR_EVENT_FIFO #SET_REG(06,03) #COMMAND(!0,!1) #WAIT_FOR_MODE #SET_REG(06,03); // Used to change mode, TRIG is not used, instead event register is polled.

WAIT_FOR_MUTE_OFF = $s4 01 [ 4 20 05 01 00 03 03 $r4 1 123 $c3 ec $s4 00 #CLEAR_EVENT #CLEAR_EVENT $cl $d0064 $cx ]; // Wait for that firmware is loaded

HALF_RELEASE = $"Half-release" #CHANGE_MODE(31,02) #CAPTURE_EVENT; // Used where HALF_RELEASE should be done

UPDATE_PHOTO = $p5 16 $c5 00 $cl $u16 $cx;

UPDATE_COLOR = $p5 08 $c5 00 #COM_EVENT(58,07) $cl #COM_EVENT(58,00) $cx;

UPDATE_WB = $p5 01 $c5 00 $d0048 $cl $d0048 $u01 $cx;

UPDATE_ISO = $p5 11 $c5 00 $cl $u11 $cx;

UPDATE_FLICK = $p5 02 $c5 00 $cl $u02 $cx;

WB_ISO100 = #SET_REG(43,25) #SET_REG(44,73); // FLASH_CC_R = 0x25 FLASH_CC_B = 0x73 (colour temperature of 7000 K for flash)
WB_ISO200 = #SET_REG(43,27) #SET_REG(44,6D); // FLASH_CC_R = 0x27 FLASH_CC_B = 0x6D (colour temperature of 6000 K for flash)
WB_ISO400 = #SET_REG(43,2A) #SET_REG(44,6F); // FLASH_CC_R = 0x2A FLASH_CC_B = 0x6F (colour temperature of ???? K for flash)

IS_SET= $bf 01 1 1;
IS_UNSET= $bf 00 1 1;
IS_GET= $m0 f $b0 00 2 6 $b0 00 0 1 $>0 1;

SET_FPS_SS= #SET_REG(09,!0) #COM_EVENT(03,!1); // fps and slow shutter

VIDEO_MODE= $z5 $c5 21 $s5 01 $cl $c5 22 $s5 01 $cl $c5 23 $s5 01 $cl $c5 24 $s5 01 $cl $s5 00 $cx $cx $cx $cx;

IMG_TYPE_GET= $m0 f $b0 00 1 7; // control bits

// SCENE SETTINGS
//================================================

NORM_MODE = #UPDATE_FLICK // update flicker correction
#COM_EVENT(55,00) // Reset contrast
#COM_EVENT(56,03) // Reset sharpness
#COM_EVENT(06,00) // reset exposure
#SET_REG(40,06) // Set flash ISO to default 320
#UPDATE_COLOR // colour saturation
#WB_ISO400;

DOC_MODE = #UPDATE_FLICK
#COM_EVENT(55,01) // Increase contrast to 1
#COM_EVENT(56,07) // Increase sharpness to (7)
#COM_EVENT(06,01) // Increase exposure to 1
#SET_REG(40,01) // Set flash ISO to 100
#COM_EVENT(58,08) // colour saturation
#WB_ISO100;

Landscape = #UPDATE_FLICK #COM_EVENT(55,00) #COM_EVENT(56,00) #COM_EVENT(06,01) #UPDATE_COLOR;

Sport_scene = #UPDATE_FLICK #COM_EVENT(55,00) #COM_EVENT(56,00) #COM_EVENT(06,01) #UPDATE_COLOR;

Portrait = #UPDATE_FLICK
#COM_EVENT(55,00) // Reset contrast
#COM_EVENT(56,02) // Sharpness 00 to 08
#COM_EVENT(06,00) // Reset exposure
#SET_REG(40,05) // flash iso 250
#UPDATE_COLOR // updates colour
#WB_ISO200;

Nightportrait = #UPDATE_FLICK
#COM_EVENT(55,00) // Reset contrast
#COM_EVENT(56,01) // Sharpeness 00 to 08
#SET_REG(40,05) // Set flash ISO to 250
#COM_EVENT(58,06) // colour saturation
#COM_EVENT(06,01) // exposure
#SET_REG(32,00) // normal af
WB_ISO200;

Twilight_landscape = #UPDATE_FLICK #COM_EVENT(55,00) #COM_EVENT(56,00) #COM_EVENT(06,01) #COM_EVENT(58,06);

Beach_snow = #UPDATE_FLICK #COM_EVENT(55,00) #COM_EVENT(56,02) #COM_EVENT(06,00) #COM_EVENT(58,05);

// OTHER SEQ
//================================================

seq_init= // $d0014
#WAIT_FOR_MUTE_OFF
#CHANGE_MODE(34,01) // Draft mode
#SET_REG(1c,01) // JPEG_CONTINUOUS_NUM = 1
#SET_REG(10,01) // YC_CONTINUOUS_NUM = 1
#SET_REG(32,00) // AF_SCAN_MODE => 0 Normal one focus window

#SET_REG(12,15) #SET_REG(11,B3) // JPEG_RETRY_LIMIT = 0x15B3 = 5555d milliseconds
#SET_REG(20,62) // JPEG_BURST_QUALITY = 0x62 = 98d

#SET_REG(36,18) #SET_REG(37,18) // AE_MSHUT_LONG = 1/25 AE_MSHUT_SHORT = 1/25 //For Auto only
#SET_REG(41,00) // AE_LEDFLASH_OFFSET = 0x0400
#SET_REG(42,04) // Low byte of AE_LEDFLASH_OFFSET
#SET_REG(58,F0) // CC_FLASH_OFFSET_MAX_RATIO
#SET_REG(59,A0) // CC_FLASH_OFFSET_MIN_RATIO
#SET_REG(5A,0D) // CC_FLASH_OFFSET_DARK
#SET_REG(5B,2B) // CC_FLASH_OFFSET_BRIGHT
#NORM_MODE

#SET_REG(38,47) // 23b4 AE_FLASHINFO_SHORT = ISO 400, 1/30 s (no use level)
#SET_REG(39,47) // 23b4 AE_FLASHINFO_LONG = ISO 400, 1/30 s (use level)
#COM_EVENT(5a,08) // OFF, start FLASH_MODE 0b00001000 (FLASH INFO) No mech shutter, flash off

#COM_EVENT(72,00) // Update registers, INFO_GET_DATA
#READ_REG(4d,$r2 9 9) // ROM_BUILD_VERSION in reg 9
$s7 00 // Flag for ACM (BestPic) abort 0 => init, 1 => event received, 2 => stop request, ff => Abort
$s8 00 // Used to remember ISO setting in IS mode
$sa 00 // Default normal scene
$sb 00 // Default flash off
$sc 00 // Default normal scene
$sd 00 // Default no burst mode in snapshot
$se 00 // Default no image stabilization
$sf 01; // Used in resolution ids: 1 => JPEG, 0 => YCbCr

seq_ping=;

sup_properties = 0[3,f,9], 1[0,8,0], 2[0,3,0], 3[0,3,0], 4[0,3,0],
5[0,9,0], 6[a,a0,a], 7[0,0,0], 8[0,4,0], 9[0,6,0],
a[0,5,0], b[0,0,0], c[0,0,0], e[0,5,0],10[0,7,0],
11[0,7,0],12[0,ff,0],14[0,11,8],15[0,11,8],
16[0,1,0],17[0,0,0],18[0,1,0],19[0,3,0], 1a[0,0,0],
1b[0,9,0],1c[0,1,0], 1d[0,3,0],1e[0,1,0], 1f[0,0,0];

// Property 0, Exposure
//---------------------------------------------------

seq_set_prop_0 = $s5 %0 $ma 5 $-5 0a #COM_EVENT(06,$w5);

seq_get_prop_0 = $s3 00 $s2 00 $s1 00 $m0 a;

// Property 1, White balance
//---------------------------------------------------

seq_set_prop_1_0 = #COM_EVENT(11,80);
seq_set_prop_1_1 = #COM_EVENT(11,03);
seq_set_prop_1_2 = #COM_EVENT(11,04);
seq_set_prop_1_3 = #COM_EVENT(11,05);
seq_set_prop_1_4 = #COM_EVENT(11,06);
seq_set_prop_1_5 = #COM_EVENT(11,09);
seq_set_prop_1_6 = #COM_EVENT(11,01);
seq_set_prop_1_7 = #COM_EVENT(11,07);
seq_set_prop_1_8 = #COM_EVENT(11,08);

// Property 2, Flicker mode
//---------------------------------------------------

seq_set_prop_2_0= #COM_EVENT(21,01); //Auto detect
seq_set_prop_2_1= #COM_EVENT(21,02); //50Hz detect
seq_set_prop_2_2= #COM_EVENT(21,03); //60Hz detect
seq_set_prop_2_3= #COM_EVENT(21,00); //Disable

// Property 3, Vertical mirroring
//---------------------------------------------------

seq_set_prop_3_0 = #COM_EVENT(52,00); // OFF 0b00000000 Capt/draft
seq_set_prop_3_1 = #COM_EVENT(52,0a); // ON 0b00001010 Capt/draft

// Property 4, Horizontal mirroring
//---------------------------------------------------

seq_set_prop_4_0 = #COM_EVENT(52,00); // OFF 0b00000000 Capt/draft
seq_set_prop_4_1 = #COM_EVENT(52,05); // ON 0b00000101 Capt/draft

// Property 5, JPEG compression
//---------------------------------------------------

JFL= #SET_REG(1A,!1) #SET_REG(1B,!0);
JMIN= #SET_REG(15,!1) #SET_REG(16,!0);
JMAX= #SET_REG(13,!1) #SET_REG(14,!0);
JAVG= #SET_REG(17,!1) #SET_REG(18,!0);
JLOW= #SET_REG(19,64); 100%
JHIGH=#SET_REG(19,5f); 95%
RETRY=#SET_REG(12,!1) #SET_REG(11,!0);

seq_set_prop_5= $s0 %0
$c0 00 #JHIGH #JFL(5F,62) #JMIN(02,58) #JMAX(03,84) #JAVG(03,20) $cl
$c0 01 #JLOW #JFL(63,64) #JMIN(03,2C) #JMAX(03,85) #JAVG(03,58) $cl
$c0 02 #JHIGH #JFL(5F,62) #JMIN(00,0b) #JMAX(00,96) #JAVG(00,37) $cl
$c0 03 #JLOW #JFL(63,64) #JMIN(00,CD) #JMAX(01,a6) #JAVG(01,40) $cl
$c0 04 #JHIGH #JFL(5F,62) #JMIN(00,3c) #JMAX(01,90) #JAVG(00,c8) $cl
$c0 05 #JLOW #JFL(62,64) #JMIN(03,09) #JMAX(03,83) #JAVG(03,47) $cl
$c0 06 #JHIGH #JFL(5B,60) #JMIN(00,96) #JMAX(02,58) #JAVG(01,90) $cl
$c0 07 #JLOW #JFL(61,63) #RETRY(1B,44) #JMIN(03,20) #RETRY(1B,44) #JMAX(03,84) #RETRY(1B,44) #JAVG(03,4D) #RETRY(1B,44) $cl // retry 6980 milliseconds
$c0 08 #JHIGH #JFL(5B,5F) #RETRY(1A,0A) #JMIN(02,58) #RETRY(1A,0A) #JMAX(03,84) #RETRY(1A,0A) #JAVG(03,20) #RETRY(1A,0A) $cl // retry 6666 milliseconds
$c0 09 #JLOW #JFL(5F,61) #RETRY(1B,44) #JMIN(03,28) #RETRY(1B,44) #JMAX(03,84) #RETRY(1B,44) #JAVG(03,58) #RETRY(1B,44) // retry 6980 milliseconds
$cx $cx $cx $cx $cx $cx $cx $cx $cx $cx;

// Property 6, Zoom
//---------------------------------------------------

seq_set_prop_6 = #SET_REG(3d,3C) // ZM_SMTH_SPEED = 60
#SET_REG(3e,01) // ZM_SMTH_INTERVAL = 1
$s4 %0 // Place value in reg 4
$s5 40 // Place value 64 in reg 5
$*5 0a // Multiply reg 5 by a
$/5 r4 // Divide reg 5 with reg 4
$"Cam_mag_value_%5" #COM_EVENT(61,$w5);

seq_get_prop_6 = #READ_REG(3c,$r2 3 3) $"MAG_%3" // Read ZM_STEP
$c3 40 $s0 0A $cl $cx $c3 3F $s0 0A $cl $cx
$c3 3E $s0 0A $cl $cx $c3 3D $s0 0A $cl $cx
$c3 3C $s0 0B $cl $cx $c3 3B $s0 0B $cl $cx
$c3 3A $s0 0B $cl $cx $c3 39 $s0 0B $cl $cx
$c3 38 $s0 0B $cl $cx $c3 37 $s0 0C $cl $cx
$c3 36 $s0 0C $cl $cx $c3 35 $s0 0C $cl $cx
$c3 34 $s0 0C $cl $cx $c3 33 $s0 0D $cl $cx
$c3 32 $s0 0D $cl $cx $c3 31 $s0 0D $cl $cx
$c3 30 $s0 0D $cl $cx $c3 2F $s0 0E $cl $cx
$c3 2E $s0 0E $cl $cx $c3 2D $s0 0E $cl $cx
$c3 2C $s0 0F $cl $cx $c3 2B $s0 0F $cl $cx
$c3 2A $s0 0F $cl $cx $c3 29 $s0 10 $cl $cx
$c3 28 $s0 10 $cl $cx $c3 27 $s0 10 $cl $cx
$c3 26 $s0 11 $cl $cx $c3 25 $s0 11 $cl $cx
$c3 24 $s0 12 $cl $cx $c3 23 $s0 12 $cl $cx
$c3 22 $s0 13 $cl $cx $c3 21 $s0 13 $cl $cx
$c3 20 $s0 14 $cl $cx $c3 1F $s0 15 $cl $cx
$c3 1E $s0 15 $cl $cx $c3 1D $s0 16 $cl $cx
$c3 1C $s0 17 $cl $cx $c3 1B $s0 18 $cl $cx
$c3 1A $s0 19 $cl $cx $c3 19 $s0 1A $cl $cx
$c3 18 $s0 1B $cl $cx $c3 17 $s0 1C $cl $cx
$c3 16 $s0 1D $cl $cx $c3 15 $s0 1E $cl $cx
$c3 14 $s0 20 $cl $cx $c3 13 $s0 22 $cl $cx
$c3 12 $s0 24 $cl $cx $c3 11 $s0 26 $cl $cx
$c3 10 $s0 28 $cl $cx $c3 0F $s0 2A $cl $cx
$c3 0E $s0 2E $cl $cx $c3 0D $s0 31 $cl $cx
$c3 0C $s0 35 $cl $cx $c3 0B $s0 3A $cl $cx
$c3 0A $s0 40 $cl $cx $c3 09 $s0 47 $cl $cx
$c3 08 $s0 50 $cl $cx $c3 07 $s0 5B $cl $cx
$c3 06 $s0 6B $cl $cx $c3 05 $s0 80 $cl $cx
$c3 04 $s0 A0 $cl $cx $s1 00 $s2 00 $s3 00 $"ZOOM_%3_%2_%1_%0";

// Property 7, Night mode
//---------------------------------------------------

seq_set_prop_7= $s0 %0 #COM_EVENT(34,01) $c0 00 #SET_FPS_SS(16,16) $cl #SET_FPS_SS(10,10) $cx;

// Property 8, Effects
//---------------------------------------------------
// 0 => normal, 1 => negative, 2 => solarize, 3 => sepia 4 => black&white

seq_set_prop_8 = $s5 %0 $c5 00 #COM_EVENT(58,07) $cl #COM_EVENT(58,00) $cx #COM_EVENT(53,%0);

// Property 9, Focus mode
//---------------------------------------------------

seq_set_prop_9_0 = #SET_REG(32,00); // 0x32 = AF_SCAN_MODE => 0 Normal
seq_set_prop_9_1 = #SET_REG(32,01); // 0x32 = AF_SCAN_MODE => 1 Full range
seq_set_prop_9_2 = ;
seq_set_prop_9_3 = ;
seq_set_prop_9_4 = ;
seq_set_prop_9_5 = #READ_REG(32,$r2 0 0) // Check what reg 32 contains
$b0 00 1 7 // Mask out LSB bit
$c0 00 // LSB was zero, i.e. scan mode was normal
#SET_REG(32,00) // Use one AF window, NORM
$cl // scan mode was full range
#SET_REG(32,01) // Use macro settings
$cx;
seq_set_prop_9_6 = #READ_REG(32,$r2 0 0) // Check what reg 32 contains
$b0 00 1 7 // Mask out LSB bit
$c0 00 // LSB was zero, i.e. scan mode was normal
#SET_REG(32,04) // Use multiple AF windows, normal
$cl // scan mode was full range
#SET_REG(32,05) // Use multiple AF windows, full range
$cx;

// Property 10, Focus operation
//----------------------------------------------------

seq_set_prop_a_0 = $go 37 0; // Turn off AF-LED

seq_set_prop_a_1 = $c9 08 // R5
#COM_EVENT(72,00) // Update the registers
#READ_REG(28,$r2 5 5) // Read AE-value (MSB)in camera reg 28
$>5 5
$p4 10 // Put value of scene property in reg 4
$c4 06 // Sports mode?
// AF-LED OFF in sports mode
$cl
$c5 00 // AF-LED ON?
$go 37 1 // Set gpio 3:7 (AF-LED) to high (one)
$cl $cx
$cx
$cl // else R6
$ce 01 // AF-LED for IS_MOVIE_MODE?
#COM_EVENT(72,00) // Update the registers
#READ_REG(28,$r2 5 5) // Read AE-value (MSB)in camera reg 28
$>5 5
$c5 00 // AF-LED ON?
$go 37 1 // Set gpio 3:7 (AF-LED) to high (one)
$cl $cx
$cl // Not IS_MOVIE_MODE
#COM_EVENT(72,00) // Update the registers
#READ_REG(3a,$r2 5 5) // Read AE_FLASHINFO_STATUS
$p4 10 // Put value of scene property in reg 4
$c4 06 // Sports mode?
// AF-LED OFF in sports mode
$cl
$c5 03 // AF-LED ON?
$go 37 1 // Set gpio 3:7 (AF-LED) to high (one)
$cl $cx $cx $cx $cx
#COM_EVENT(42,01);

seq_set_prop_a_2 = $go 37 0 #COM_EVENT(43,00); // Go to infinity

seq_get_prop_a = 05 01 00 03 03 $f $r4 0 012 // Read out reg. 345 from cam to platform reg 012
$c2 e6 // e6 = AF event
$c1 00
$s0 04 $go 37 0 // AF success, turn off AF-LED
$cl
$s0 05 $go 37 0 // AF failed, turn off AF-LED
$cx
$cl
$c2 e7 // e7 = MF event
$p0 0a
$c0 01
$s0 03 // in progress
$cl
$c1 00
$s0 04 $go 37 0 // MF succes, turn off AF-LED
$cl
$s0 05 $go 37 0 // MF failed, turn off AF-LED
$cx $cx $cl
$s0 03 // in progress
$cx $cx
$s1 00 $s2 00 $s3 00 $"FOCUSOPERATION_%0_%1_%2_%3";

// Property 11, EXIF 1
//----------------------------------------------------

seq_get_prop_b = #COM_EVENT(72,00) // Update the registers, INFO_GET_DATA
#READ_REG(48,$r2 3 3) // Put shutter(H, MSB) in reg 3
#READ_REG(47,$r2 2 2) // Put shutter(L, LSB) in reg 2
#READ_REG(46,$r2 1 1) // Put ISO(H, MSB) in reg 1
#READ_REG(45,$r2 0 0) // Put ISO(L, LSB) in reg 0
$"EXIF1_%3_%2_%1_%0";

// Property 12, EXIF 2
//----------------------------------------------------

seq_get_prop_c = #COM_EVENT(72,00) // Update registers, INFO_GET_DATA
#READ_REG(49,$r2 0 0) // Put WB in reg 0
$c0 00 // reg 0 = 00 ?
$cl
$-0 02 // Subtract 2 from reg 5
$cx
#READ_REG(4a,$r2 1 1) // Put distance in reg 1
#READ_REG(4b,$r2 2 2) // Put flash (LED) in reg 2
#READ_REG(26,$r2 3 3) // Put q-factor (JPEG_HOST_QUALITY) in reg 3
$"EXIF2_%3_%2_%1_%0";

// Property 14, Xenon flash support
//----------------------------------------------------

seq_set_prop_e_0 = $sb 00 $c9 08 #COM_EVENT(5a,00) $cl #COM_EVENT(5a,08) $cx;
seq_set_prop_e_1 = ; // No external flash
seq_set_prop_e_2 = $sb 02; // Auto
seq_set_prop_e_3 = $sb 03; // Auto, red-eye
seq_set_prop_e_4 = $sb 04 // Forced ON, for service menu and production tests
$c9 08 // R5 camera version?
#COM_EVENT(5a,83) // Forced xenon 0b10000011, slow sync at beginning
$cl
#COM_EVENT(51,00) // Sensor scene "Auto 00"
#COM_EVENT(5a,9b) // FLASH_MODE 0b10001011: Flash on, RER off, sync on beginning.
$cx;

// Property 16, Scenes
//----------------------------------------------------

seq_set_prop_10_0 = $"Normal_scene" $sc 00
#COM_EVENT(51,00) // Normal
#UPDATE_WB // Update whitebalance
#UPDATE_PHOTO // update photo property
#UPDATE_ISO // updates iso
#NORM_MODE; // normal mode

seq_set_prop_10_1 = $"Portrait_scene" $sc 01
#COM_EVENT(51,00) // Sensor scene
#UPDATE_WB
#UPDATE_ISO
#Portrait;

seq_set_prop_10_2 = $"Landscape_scene" $sc 06
$c9 08 // R5 camera version?
#COM_EVENT(03,0C)
#COM_EVENT(51,06) // Landscape
$cl // Else R6
$ce 01 // IS ON?
#COM_EVENT(51,08) // Sensor scene "Custom 08"
#COM_EVENT(08,05) // AE_PHOTOMETRY = 05
$cl
#COM_EVENT(51,06) // Sensor scene "Landscape 06"
$cx
$cx
#UPDATE_WB // Update whitebalance
#UPDATE_ISO
#Landscape;

seq_set_prop_10_3 = $"Twilight_landscape_scene" $sc 04
#COM_EVENT(51,00) // night
$p5 01
$c5 00 // WB is auto?
$d0118 // Delay 280 milliseconds
$cl
$d0118 // Delay 280 milliseconds
$u01 // Update WB
$cx
#UPDATE_WB // Update whitebalance
#UPDATE_ISO // update iso
#Twilight_landscape;

seq_set_prop_10_4 = $"Nightportrait" $sc 07
#COM_EVENT(51,04) // night
#UPDATE_WB // Update whitebalance
#UPDATE_ISO // update iso
#Nightportrait;

seq_set_prop_10_5 = $"Beach_snow_scene" $sc 02
#COM_EVENT(03,0f) // 7,5 fps AE_SLOW_SHUTTER
$c9 08 // R5 camera version
#COM_EVENT(51,02) // Beach/snow
$cl // Else R6 camera
$ce 01 // IS ON?
#COM_EVENT(51,08) // Sensor scene "Custom 08"
#COM_EVENT(08,03) // AE_PHOTOMETRY = 03
$cl // Else R6
#COM_EVENT(51,02) // Sensor scene "Beach/snow 02"
$cx
$cx
#UPDATE_WB // Update whitebalance
#Beach_snow;

seq_set_prop_10_6 = $"Sport_scene" $sc 05
#COM_EVENT(51,05) // Sensor scene "Sports 05"
#UPDATE_WB // Update whitebalance
#Sport_scene;

seq_set_prop_10_7 = $"Document_scene" $sc 03
#COM_EVENT(03,0f) // 7,5 fps AE_SLOW_SHUTTER
#COM_EVENT(51,00) // Sensor scene "Auto 00"
#UPDATE_WB // Update whitebalance
#DOC_MODE;

// Property 17, ISO
//----------------------------------------------------

seq_set_prop_11_0= $s8 00 #COM_EVENT(02,00); // AUTO ISO
seq_set_prop_11_1= $s8 01 #SET_REG(2a,01) #COM_EVENT(02,04); // ISO 100
seq_set_prop_11_2= $s8 04 #SET_REG(2a,04) #COM_EVENT(02,04); // ISO 200
seq_set_prop_11_3= $s8 07 #SET_REG(2a,07) #COM_EVENT(02,04); // ISO 400
seq_set_prop_11_4= $s8 0a #SET_REG(2a,0a) #COM_EVENT(02,04); // ISO 800
seq_set_prop_11_5= ;

// Property 22, Photo metering
//----------------------------------------------------

seq_set_prop_16_0 = #COM_EVENT(08,00); // Multimode, centerweighted
seq_set_prop_16_1 = #COM_EVENT(08,01); // Spot, centerspot

// Property 23, Xenon flash required
//----------------------------------------------------

seq_get_prop_17 = $c9 08 //R5 camera version
#COM_EVENT(72,00) // Update the registers
#READ_REG(28,$r2 5 5) // Read AE-value (MSB)in camera reg 28
$>5 5 // Shift reg 5 five bits to the right
$cb 02 // Auto flash?
$c5 00 // Use flash
#COM_EVENT(5a,94) // Automatic 0b10010100, mech shutter
$s0 01 // Set reg 0 to 01
$"autoflash"
$cl #COM_EVENT(5a,00) // OFF
$s0 00 // Set reg 0 to 00
$"noautoflash"
$cx $cx
$cb 03 // Auto flash RER?
$c5 00 // Use flash
#COM_EVENT(5a,b4) // Automatic 0b10110100, red-eye, mech shutter
$s0 01 // Set reg 0 to 01
$"autoflash_rer"
$cl #COM_EVENT(5a,00) // OFF
$s0 00 // Set reg 0 to 00
$"noautoflash_rer"
$cx $cx
$s1 00 $s2 00 $s3 00 $"FLASH_%0"
$cl // R6 camera version
$ce 00 // IS OFF?
#COM_EVENT(72,00) // Update the registers
#READ_REG(3a,$r2 5 5) // Read AE_FLASHINFO_STATUS
$"FLASH_INFO_%5"
$cb 02 // Auto flash?
$c5 03 // Use flash
$cc 00 // Normal scene?
#READ_REG(32,$r2 0 0) // Check what reg 32 contains
$b0 00 1 7 // Mask out LSB bit
$c0 00 // LSB was zero, i.e. scan mode was normal
#SET_REG(32,00) // Use one AF window, normal
$cl // scan mode was full range
#SET_REG(32,01) #SET_REG(36,17) #SET_REG(37,17) #WB_ISO100 #SET_REG(40,03)
$cx #SET_REG(36,18) #SET_REG(37,18) #COM_EVENT(03,0f) #COM_EVENT(58,04) #UPDATE_FLICK
$cl
$cc 01 // Portrait?
#SET_REG(36,17) #SET_REG(37,17) #COM_EVENT(03,0f) #COM_EVENT(58,04) #UPDATE_FLICK
$cl
$cc 07 // Night portrait?
$"slow_sync"
#COM_EVENT(03,0f) #COM_EVENT(58,04) #UPDATE_FLICK
#SET_REG(36,23) #SET_REG(37,23) // AE_MSHUT_LONG = 1/2
$cl
$cc 03
#COM_EVENT(03,10) #SET_REG(36,16) #SET_REG(37,16) #COM_EVENT(58,04) #UPDATE_FLICK
$cx $cx $cx $cx
#COM_EVENT(5a,8b) // FLASH_MODE 0b10001011: Flash on, RER off, sync on beginning.
$s0 01 // Set reg 0 to 01
$"autoflash"
$cl #COM_EVENT(5a,08) // OFF, FLASH_MODE 0b00001000: Flash off, electronic shutter only.
$s0 00 // Set reg 0 to 00
$"noautoflash"
$cx $cx
$cb 03 // Auto flash?
$c5 03 // Use flash
$cc 00 // Normal scene?
#READ_REG(32,$r2 0 0) // Check what reg 32 contains
$b0 00 1 7 // Mask out LSB bit
$c0 00 // LSB was zero, i.e. scan mode was normal
#SET_REG(32,00) // Use one AF window, normal
$cl // scan mode was full range
#SET_REG(32,01) #SET_REG(36,17) #SET_REG(37,17) #WB_ISO100 #SET_REG(40,03)
$cx #SET_REG(36,18) #SET_REG(37,18) #COM_EVENT(03,0f) #COM_EVENT(58,04) #UPDATE_FLICK
$cl
$cc 01 // Portrait?
#SET_REG(36,17) #SET_REG(37,17)
#COM_EVENT(03,0f) #COM_EVENT(58,04) #UPDATE_FLICK
$cl
$cc 07 // Night portrait?
$"slow_sync"
#COM_EVENT(03,0f) #COM_EVENT(58,04) #UPDATE_FLICK
#SET_REG(36,23) #SET_REG(37,23) // AE_MSHUT_LONG = 1/2
$cl
$cc 03
#COM_EVENT(03,10) #SET_REG(36,16) #SET_REG(37,16) #COM_EVENT(58,04) #UPDATE_FLICK
$cx $cx $cx $cx
#COM_EVENT(5a,ab) // FLASH_MODE 0b10101011: flash on, RER on, sync on beginning.
$s0 01 // Set reg 0 to 01
$"autoflash_rer"
$cl
#COM_EVENT(5a,08) // OFF, FLASH_MODE 0b00001000: flash off, electronic shutter only.
$s0 00 // Set reg 0 to 00
$"noautoflash_rer"
$cx $cx $cl $"IS_ON_flash_disabled" $s0 0a $cx $s1 00 $s2 00 $s3 00 $"FLASH_%0" $cx;

// Property 24, Image stabilization
//----------------------------------------------------

seq_set_prop_18_0= #IS_UNSET #SET_REG(2a,$w8) $c8 00 #COM_EVENT(02,00) $cl #COM_EVENT(02,04)$cx;
seq_set_prop_18_1= #IS_SET #COM_EVENT(02,00);

// Property 25, Continuous zoom
//----------------------------------------------------

seq_set_prop_19_0 = #COM_EVENT(61,84);
seq_set_prop_19_1 = #SET_REG(3d,01) #SET_REG(3e,01) #COM_EVENT(61,04);
seq_set_prop_19_2 = #SET_REG(3d,01) #SET_REG(3e,01) #COM_EVENT(61,40);

// Property 26, Get continuous zoom
//----------------------------------------------------

seq_get_prop_1a = #READ_REG(3c,$r2 0 0) $s3 00 $s2 00 $s1 00 $"ZOOM_STEP_%3_%2_%1_%0";

// Property 27, Snapshot operation
//----------------------------------------------------

seq_set_prop_1b = $sd %0; // Place value of input in reg d

// Property 28, HALF RELEASE,
//----------------------------------------------------

seq_set_prop_1c_0 = #CHANGE_MODE(34,01) #COM_EVENT(43,00);
seq_set_prop_1c_1 = #HALF_RELEASE; // Half-release mode

// Property 29, BestPic operation,
//----------------------------------------------------

seq_set_prop_1d_0= $sa 00; // init
seq_set_prop_1d_1= $sa ff; // abort
seq_set_prop_1d_2= #CHANGE_MODE(3a,00); // mode burst output (take picture)
seq_set_prop_1d_3= #SET_REG(0d,02) #CHANGE_MODE(39,44); // mode burst start (BURST_NUM = 9, BURST_REMAIN = 4)
seq_get_prop_1d= $ca 00 $s0 04 $cx // init?
$ca 01 $s0 05 $cx // ready?
$ca 02 $s0 06 $cx // delay?
$ca 03 $s0 07 $cx // done?
$ca ff $s0 08 $cx // finish?
$s1 00 $s2 00 $s3 00;

// Reset and test pattern, property 30
//---------------------------------------------------------------
seq_set_prop_1e_0 = $gr 1 $d0014 $gr 0 $d0140 #SET_REG(1c,01) #SET_REG(10,01);
seq_set_prop_1e_1 = 03 55 AA $f $r2 01 $d0005 // Testpattern
08 04 44 0C 04 00 01 00 $f $r2 01 $d0005
08 04 45 0C 04 00 01 00 $f $r2 01 $d0005
08 04 46 0C 04 00 05 00 $f $r2 01 $d0005;

// Property 31, only for tests
//---------------------------------------------------

seq_set_prop_1f_0 = #COM_EVENT(72,00) #READ_REG(28,$r2 5 5) $"AE_LEVEL_%5";

// SIZE CONFIGS
//================================================

seq_ss_config_1= $bf 01 0 1 #IS_GET $c0 00 #SET_REG(0a,09) $cl #SET_REG(0b,06) $cx;
seq_ss_config_2= $bf 01 0 1 #IS_GET $c0 00 #SET_REG(0a,08) $cl #SET_REG(0b,05) $cx;
seq_ss_config_3= $bf 01 0 1 #IS_GET $c0 00 #SET_REG(0a,06) $cl #SET_REG(0b,03) $cx;
seq_ss_config_4= $bf 01 0 1 #IS_GET $c0 00 #SET_REG(0a,03) $cl #SET_REG(0b,00) $cx;
seq_ss_config_5= $bf 01 0 1 #SET_REG(0a,00);
seq_ss_config_6= $bf 00 0 1 #IS_GET $c0 00 #SET_REG(0a,0b) $cl #SET_REG(0b,08) $cx;
seq_ss_config_7= $bf 00 0 1 #IS_GET $c0 00 #SET_REG(0a,09) $cl #SET_REG(0b,06) $cx;
seq_ss_config_8= $bf 00 0 1 #IS_GET $c0 00 #SET_REG(0a,08) $cl #SET_REG(0b,05) $cx;
seq_ss_config_9= $bf 00 0 1 #IS_GET $c0 00 #SET_REG(0a,06) $cl #SET_REG(0a,03) $cx;

seq_vf_config_11 = #SET_REG(07,03) #SET_REG(08,02) #SET_REG(09,3c)
$cc 04 #COM_EVENT(03,02) #SET_REG(2a,02) #COM_EVENT(02,04) // 2 fps AE_SLOW_SHUTTER shutter 1, iso 125
$cl #COM_EVENT(02,00) #COM_EVENT(03,0C) // 6 fps AE_SLOW_SHUTTER 1/6, reset iso
$cc 07 #COM_EVENT(03,08) #SET_REG(2a,07) #COM_EVENT(02,04) // 4 fps AE_SLOW_SHUTTER shutter 1/4 , iso 400
$cl #COM_EVENT(03,0f) #COM_EVENT(02,00) // 7,5 fps AE_SLOW_SHUTTER shutter 1/8, reset iso
$cc 00 #COM_EVENT(03,0C) // 6 fps AE_SLOW_SHUTTER shutter 1/6
$cl #COM_EVENT(03,0f) // 7,5fps shutter 1/8
$cc 01 #COM_EVENT(03,0a) #SET_REG(2a,08) #COM_EVENT(02,04) // 5 fps AE_SLOW_SHUTTER shutter 1/5 iso 500
$cl #COM_EVENT(03,0f) #COM_EVENT(02,00) // 7,5 fps shutter 1/8, reset iso
$cx $cx $cx $cx;

seq_vf_config_12= #SET_REG(07,03) #SET_REG(08,02) #SET_FPS_SS(18,0f);
seq_vf_config_19= #SET_REG(07,03) #SET_REG(08,02) #SET_FPS_SS(1f,1f);
seq_vf_config_20= #SET_REG(07,03) #SET_REG(08,02) #SET_FPS_SS(20,20);
seq_vf_config_21= #SET_REG(07,07) #SET_REG(08,06) #SET_FPS_SS(1f,1f);
seq_vf_config_22= #SET_REG(07,07) #SET_REG(08,06) #SET_FPS_SS(10,10);
seq_vf_config_23= #SET_REG(07,05) #SET_REG(08,04) #SET_FPS_SS(2A,2A);
seq_vf_config_24= #SET_REG(07,05) #SET_REG(08,04) #SET_FPS_SS(10,10);

// Rotation of viewfinder and video images
//===============================================

cam_post_processing_11 = 1; // viewfinder rotation
cam_post_processing_19 = 1; // videotelephony
cam_post_processing_20 = 1; // videotelephony

//============ STATE TRANSITIONS ============
//================================================
seq_vf_start=
#CHANGE_MODE(34,01)
$d000a
#IS_GET
$c0 01 // if IS on
#VIDEO_MODE
$c5 01 // if video mode
#CHANGE_MODE(38,01)
$cx
$cx;

seq_vf_stop= ;

seq_ss_start=
$cb 02
$go 13 0 // xenon do not charge
$cx

$cd 00 // still capture

#IMG_TYPE_GET
$c0 00 // YCbCr
#IS_GET
$c0 01 // if IS on
#CHANGE_MODE(37,01)
$cl
#CHANGE_MODE(36,01)
$cx
$cl // JPEG
#IS_GET
$c0 01 // if IS on
#CHANGE_MODE(37,81)
$cl
#CHANGE_MODE(36,81)
$cx

$c9 05 // R3
$cl
$c9 07 // R4 (no E4 event)
$cl
#CAPTURE_EVENT
$cx
$cx
$cx
$cl // BestPic output
#CHANGE_MODE(3a,$wd) // read out pic (number in rD)
$cx;

seq_ss_take= #CAPTURE_EVENT;

seq_ss_verify= #CAPTURE_EVENT $s0 01;

seq_ss_stop= ;

seq_pv_start= $sa 00 #SET_REG(0d,02) #CHANGE_MODE(39,45);

seq_pv_verify=
$h0 25 5 0000
05 01 00 03 03 $f $r4 0 012
05 02 00 06 03 $f
$ca ff // finish?
$s0 ff // abort
$cl
$s0 00
$c2 e3
$b1 00 4 4
$c1 00
$s0 01 // rotate image
$cx
$cx
$c2 ea
$c1 0a // done?
$s0 ff // abort
$cx
$cx
$c2 ee
$ca 02 // delay?
$sa 03 // done
#COMMAND(3a,00) // stop
$cl
$sa 01 // ready
$cx
$cx
$cx;

seq_pv_stop=
$ca 01 // ready?
$sa 03 // done
#COMMAND(3a,00) // stop
$cl
$sa 02 // delay
$cx;

// JPEG section
//================================================

jpeg_qtable_selector_0=$s2 00 #READ_REG(26, $r2 0 0);
jpeg_qtable_selector_1=$s2 01 #READ_REG(26, $r2 0 0); //changed from 1a

jpeg_qtable_0=10 0B 0C 0E 0C 0A 10 0E 0D 0E 12 11 10 13 18 28 1A 18 16 16 18 31 23 25
1D 28 3A 33 3D 3C 39 33 38 37 40 48 5C 4E 40 44 57 45 37 38 50 6D 51 57
5F 62 67 68 67 3E 4D 71 79 70 64 78 5C 65 67 63;

jpeg_qtable_1=11 12 12 18 15 18 2F 1A 1A 2F 63 42 38 42 64 64 64 64 64 64 64 64 64 64
64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64
64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64
64 64 64 64 64 64 64 64;

jpeg_qtable_factors=0,320100,190000,10AB00,C8000,A0000,85500,72500,64000,58E00,50000
,48C00,42B00,3D900,39200,35500,32000,2F100,2C700,2A200,28000
,26200,24600,22D00,21500,20000,1EC00,1DA00,1C900,1B900,1AB00
,19D00,19000,18400,17800,16E00,16400,15A00,15100,14800,14000
,13800,13100,12A00,12300,11C00,11600,11000,10B00,10500,10000
,FB00,F600,F100,EC00,E600,E100,DC00,D700,D200,CD00
,C800,C300,BD00,B800,B300,AE00,A900,A400,9F00,9A00
,9400,8F00,8A00,8500,8000,7B00,7600,7100,6C00,6600
,6100,5C00,5700,5200,4D00,4800,4300,3D00,3800,3300
,2E00,2900,2400,1F00,1A00,1400,F00,A00,500,100;

jpeg_header= FF D8 FF E0 00 10 4A 46 49 46 00 01 01 00 00 01 00 01 00 00
FF DB 00 84 00 $qt0 01 $qt1
FF C4 01 A2 00 00 01 05 01 01 01 01 01 01 00 00 00 00 00 00 00
00 01 02 03 04 05 06 07 08 09 0A 0B
01 00 03 01 01 01 01 01 01 01 01 01 00 00 00 00 00
00 01 02 03 04 05 06 07 08 09 0A 0B
10 00 02 01 03 03 02 04 03 05 05 04 04 00 00 01 7D
01 02 03 00 04 11 05 12 21 31 41 06 13 51 61 07
22 71 14 32 81 91 a1 08 23 42 b1 c1 15 52 d1 f0
24 33 62 72 82 09 0a 16 17 18 19 1a 25 26 27 28
29 2a 34 35 36 37 38 39 3a 43 44 45 46 47 48 49
4a 53 54 55 56 57 58 59 5a 63 64 65 66 67 68 69
6a 73 74 75 76 77 78 79 7a 83 84 85 86 87 88 89
8a 92 93 94 95 96 97 98 99 9a a2 a3 a4 a5 a6 a7
a8 a9 aa b2 b3 b4 b5 b6 b7 b8 b9 ba c2 c3 c4 c5
c6 c7 c8 c9 ca d2 d3 d4 d5 d6 d7 d8 d9 da e1 e2
e3 e4 e5 e6 e7 e8 e9 ea f1 f2 f3 f4 f5 f6 f7 f8
f9 fa
11 00 02 01 02 04 04 03 04 07 05 04 04 00 01 02 77
00 01 02 03 11 04 05 21 31 06 12 41 51 07 61 71
13 22 32 81 08 14 42 91 a1 b1 c1 09 23 33 52 f0
15 62 72 d1 0a 16 24 34 e1 25 f1 17 18 19 1a 26
27 28 29 2a 35 36 37 38 39 3a 43 44 45 46 47 48
49 4a 53 54 55 56 57 58 59 5a 63 64 65 66 67 68
69 6a 73 74 75 76 77 78 79 7a 82 83 84 85 86 87
88 89 8a 92 93 94 95 96 97 98 99 9a a2 a3 a4 a5
a6 a7 a8 a9 aa b2 b3 b4 b5 b6 b7 b8 b9 ba c2 c3
c4 c5 c6 c7 c8 c9 ca d2 d3 d4 d5 d6 d7 d8 d9 da
e2 e3 e4 e5 e6 e7 e8 e9 ea f2 f3 f4 f5 f6 f7 f8
f9 fa
FF DD 00 04 00 00
FF C0 00 11 08 $h $w 03 01 21 00 02 11 01 03 11 01
FF DA 00 0C 03 01 00 02 11 03 11 00 3F 00;
Bấm để mở rộng...

HoangTrung · 25 Tháng năm 2008

Ặc ! Thua rồi
Bác muốn chuyển cam thì down đại một cái về dùng chứ một đống thế này thì chịu.

654321 · 26 Tháng năm 2008

chà........đã chuyển rùi, nhưng ý mình muốn hỏi nhưng thông số trên của Cam ấy có được kô, mình đang dùng Cam 29.99.....

laotahoang · 27 Tháng năm 2008

Anh em ở đây toàn là a-ma-tơ, tìm cái người ta làm sẵn rồi về xài thôi. Chứ bạn nói nhìn thông số vậy mà đánh giá thì mình bó tay !

huynhductai · 27 Tháng năm 2008

29.99 là số một. Mình đã so sánh các tấm ảnh về mỗi cam khác nhau. Thì mình rút ra nhận xét như sau: 29.99 có độ nét và màu sắc tươi lại rất là chân thực. Mình cũng đã so sánh với bản 2.9 thì thấy cũng ngang ngữa. Mình thì đang xài bản 29.99, bạn xài là bản 29.99 number1 là đúng rùi đó. Đó là sự lựa chọn hoàn hảo.

BadNumberBoy · 22 Tháng sáu 2008

mấy bác ơi , em coi thấ mấy bac làm hay quá, nhưng sao tìm vòng vòng trên đây ko thấy trang nào chỉ cáhc làm vậy

Đăng nhập

Camdriver k810

654321 Thành viên

Xem thêm:

HoangTrung Guest

654321 Thành viên

laotahoang Thành viên

huynhductai Thành viên

BadNumberBoy Thành viên

Diễn đàn

iDevices

Phần mềm Cydia

Phần mềm AppStore

Games

Jailbreak

Firmware Downloads

Android

Tin tức

Ứng dụng

Game

Giao diện trang trí

Kiến thức kinh nghiệm

Nhà mạng

VinaPhone

MobiFone

Viettel

Gmobile

Vietnammobile

Mua bán

Điện thoại

iPhone, iPad, iPod

Máy tính

Sim

Phụ kiện

Khác

Tư vấn mua điện thoại

Review

Tin tức máy tính

Trò chuyện tổng hợp

Ảnh & offline

Camdriver k810

654321 Thành viên

Xem thêm:

HoangTrung Guest

654321 Thành viên

laotahoang Thành viên

huynhductai Thành viên

BadNumberBoy Thành viên

Tìm kiếm hữu ích