USB bluetooth trở chứng.

Của tui là COM 6 và COM 7

COM 6 ở portA và COM 7 ở port B.
Có khi nào cái này là đồ dỏm chỉ hỗ trợ Nokia mà không cho PXXX không nhỉ?
Cái này tui mua có 200K thôi. --> có rẻ lắm không?
Vì hàng BAFO hình như là gấp đôi! (27-28$)

Em biết!

Việc em muốn kết nối PCSuite để cài phần mềm và synchronise, khỏi cần thông qua USB DSS Station.
Không biết cái bluetooth này có phải đồ dỏm không nữa, hay có khi nó chỉ hỗ trợ Nokia, không cho PXXX?

Vậy các bác xài bluetooth loại gì thế? Có giống tui không mà sao tui thấy nó khó khăn phức tạp quá.
Hôm nay đã là ngày thứ 5 rồi...

Có khi nào do cái này là 1.2 (compliant) không?

Tui chẳng biết sao nữa.
Send từ PC sang P910i thì OK.
Nhưng ngược lại thì P910i nó cứ search rồi lại không tìm thấy... Hoặc nếu tìm thấy thì sau đó không thấy PC có tín hiệu gì cho accept --> time out.
Tui gởi hình cho các bác xem:

Nói chung là các port COM phải set thế nào cho đúng? Trong chương trình IVT cũng có chỗ đề cập cổng COM (port A, portB)...
Và vì trong control panel cũng có phần PhoneMonitorOptions cho phép xác lập cổng COM, phải không các bác?!

Rõ ràng trong PCSuite của SonyEriccson nó ghi như thế này:

6.3 CONFIGURE YOUR DEVICE FOR PC CONNECT OVER BLUETOOTH
(SYNC, FILE TRANSFER ETC.)
=====================================================================
Info:
When you connect a computer with a phone over Bluetooth two COM ports
are involved. First the computer uses a COM port to connect to the
phone. When this is done the phone will close that connection and
open a new connection, which will be used for PC Connect
(synchronisation and file transfer).
NB: It is not possible to make a backup or restore over Bluetooth.
=====================================================================
6.3.1 TDK BLUETOOTH USB ADAPTOR OR TDK BLUETOOTH PC CARD
=====================================================================
Preconditions: Bluetooth SW and HW installed. Sony Ericsson PC Suite
installed. Windows 2000, Windows XP or Windows ME.
TDK Bluetooth SW version 1.3.2.19 is used for this description.
If you are using another version it might work slightly different.
First you have to pair your phone with the computer. This only has to
be done once.
Phone:
1. Go to Control panel -> Connections -> Bluetooth -> Settings and
select On. Make sure that "Visible to other devices" is selected.
You can also give your phone a more personalised Bluetooth name.
2. When finished tap Done.
A Bluetooth icon appears in the status bar on the phone.
Computer:
3. Open My Bluetooth Place (Found on the desktop or the right menu
in TDK Bluetooth icon in system tray).
4. Double click on My Device.
5. Right click on My Bluetooth Serial Port and select Properties.
Check which COM port is set. Remember this COM port.
6. Right click the Phone Connection Link icon in the system tray
and select Properties.
7. Now make sure the COM port found above is selected.
8. Close Link Properties.
9. Go to My Bluetooth Place and double click on Find Bluetooth
Device (or Search for devices in range).
10. An icon will appear for each bluetooth device found. Right click
on the icon with the name you have given your phone and select
Pair Device.
11. Type a code for example 123 and then click Ok.
12. After a while a dialogue is asking for a passkey on the phone.
Type the same code as above and tap Done.
Now your phone and computer are paired.
The following steps shall be done when you want to connect your phone.
If you have just paired your phone and computer then your phone is
set to Discoverable. Normally when you like to connect the phone it
is recommended to be set to On.
13. In My Bluetooth Place right click the icon for your phone and
select Connect Bluetooth Serial Port. If this menu item does not
exist then you shall select Discover Available Services. From now
you will have this menu item. Go back and select it.
14. You will get a Connection Request dialogue on your phone.
Tap Accept. The phone icon and the Bluetooth icon in the system
tray turns green to indicate that the phone is connected.
15. Now you will probably get a dialog telling you that the Bluetooth
Serial Port failed: The remote device closed the connection.
This is correct behaviour. (See the info 6.3)
16. If this is the very first time you connect this phone you will
get a wizard asking for a name (Go ahead with this wizard).
Otherwise you are connected and a phone icon will show up in
system tray.
Now your phone is connected and you can start to synchronize or
transfer files.
Tip: You can also connect the phone from the system tray icon.
Select Quick Connect -> Bluetooth Serial Port
=====================================================================
6.3.2 XIRCOM WIRELESS BLUETOOTH ADAPTER (CREDITCARD/REALPORT2)
=====================================================================
Preconditions: Bluetooth SW and HW installed. Sony Ericsson PC Suite
installed. Windows 2000, Windows XP or Windows ME.
Xircom CreditCard/RealPort2 Bluetooth Adapter Version 1.10 is used
for this description. If you are using another version it might work
slightly different.
First you have to pair your phone with the computer. This only has to
be done once.
Phone:
1. Go to Control panel -> Connections -> Bluetooth -> Settings and
select On. Make sure that "Visible to other devices" is selected.
You can also give your phone a more personalised Bluetooth name.
2. When finished tap Done.
A Bluetooth icon appears in the status bar on the phone.
Computer:
3. Right click the Phone Connection Link icon in the system tray and
select Properties.
4. Select all the Bluetooth or Unknown connections (should be 8 or 9
of them) then Close Link Properties. (In fact it is only one of
the ports that needs to be enabled but there is no way to know
which one at this moment).
5. Open Xircom BlueView (Found in the start menu. Start –> Programs
-> Xircom Utilities -> Launch BlueView or the right menu from the
Xircom Bluetooth icon in system tray).
6. Select New Devices in Range and click on the Refresh button.
7. An entry will appear for each bluetooth device found. Double
click on the entry with the name you have given your phone.
8. Right click on Serial Port and select Connect.
9. A dialog Connect to remote Bluetooth device appears.
Select Permanent (Connect again) and check Pair (Secure with
Passkey) Then click OK.
10. A dialog asking for a Passkey appears. Type a code for example
123 and then click Ok.
11. After a while a dialogue is asking for a passkey on the phone.
Type the same code as above and tap Done.
12. You will get a Connection Request dialogue on your phone.
Tap Accept.
Now your phone and computer are paired.
The following steps shall be done when you want to connect Your
phone. If you have just paired your phone and computer then your
phone is set to Discoverable. Normally when you like to connect
the phone it is recommended to be set to On.
13. Open BlueView, select Known Device and double click on your
phone.
14. Right click on Serial Port and select Connect,
15. You will get a Connection Request dialogue on your phone.
Tap Accept. The Xircom Bluetooth icon will change appearance to
indicate that a device is connected.
16. If this is the very first time you connect this phone you will
get a wizard asking for a name (Go ahead with this wizard).
Otherwise you are connected and a phone icon will show up in
system tray.
Now your phone is connected and you can start to synchronize or
transfer files.
17. If you open the Link Properties. You will see which port is
connected. It is not the same port as you can see in BlueView
(See the info 6.3). Now you can deselect the ports you did select
in step 4, except the one which is currently connected.
...

Trong khi đó tui nhận file từ PC thì OK

Nguyên 1 file mp3 to tướng!